Nippon Paint EA7 Finish Epoxy Floor Paint 5L
- Regular price
- RM 143.90
- Sale price
- RM 143.90
- Regular price
-
RM 149.00 - RM 159.00
Share
NIPPON PAINT EA7 FINISH is a good performance two pack amine adduct cured epoxy coating that gives a glossy finishing appearance. This good performance finish makes it suitable to be applied on concrete substrates where adhesion to concrete is crucial and abrasion resistance is required.
PRODUCT FEATURES:
• Good adhesion and good abrasion resistance
• Gloss finishing
Paint Type: Solvent Base
Product Type: Interior
Finishing: Gloss ,Variety of Colours
Recommended Substrate: Properly primed steel, masonry and tile
Pack Size: 5 L (4.375 L Base and 0.625 L Hardener)
Pigment : Organic and inorganic pigments
Binder : Epoxy and amine adduct
Thinner : Combination of aromatic, ketone and alcohol
Drying Time : Touch Dry : 3 - 4 Hours
: Hard Dry : 16 hours
Overcoating Time : Minimum 16 hours (Dependent on temperature and humidity)
No. of Coats : 1 - 3 coats
Mixing Ratio : 7 parts by volume of Base to 1 part by volume of Hardener. (Stir the content of the Base component, continue stirring and gradually add the total contents of the Hardener component, continue stirring until a homogeneous mix is
obtained.)
APPLICATION METHOD:
Brush, roller, compressed air spray and airless spray. Preferably use airless spray if a thicker coat is required in one application. Brush, roller and compressed air spray generally lead to lower film thickness, so more applications may be required to obtain the recommended thickness per coat. When airless spray is being used, excessive high tip spraying pressure should be avoided. The minimum pressure at the pump conducive with good atomisation should be used. Brush and roller are recommended for small areas and touch-up only. Good quality brushes and mohair/ short nap rollers should be used with full strokes. Avoid rebrushing. Additional coats may be required to achieve minimum specified film thickness.
RECOMMENDED COATING SYSTEM:
Concrete / Cement Floor
Primer : Nippon Paint Penetrative Epoxy Primer/ Nippon Paint EA9 Finish HB : 1 Coat
Top Coat : Nippon Paint EA7 Finish : 2 Coats
Steel
Primer : Nippon Paint EA9 Red Oxide Primer : 1 Coat
Top Coat : Nippon Paint EA7 Finish : 2 Coats
Tile/Ceramic Surfaces
Primer : Nippon Paint Tile Primer/ Nippon Paint EA9 Finish HB: 1 Coat
Top Coat : Nippon Paint EA7 Finish : 2 Coats
Cleaning: SA-65 Thinner. Clean up equipment with thinner immediately after use
SAFETY PRECAUTIONS:
• Keep container tightly closed and keep out of reach children or away from food and drink.
• Ensure good ventilation during application and drying.
• When applying paint, it is advisable to wear eye protection.
• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.
• Remove splashes from skin by using soap or water.
• Paint must always be stored in a cool place.
• When transporting paint, care must be taken. Always keep container in a secure upright position.
• Dispose off any paint waste in accordance with the appropriate
Reviews
Be the first to review
Write an review
How would you rate the product?
More thought about the product